Product Description

The Cut Resistant Hand Gloves Level-5 are protective work gloves designed to help reduce the risk of hand injuries when users handle materials with sharp or abrasive edges.

They are suitable for industrial, engineering, laboratory, workshop, construction and material-handling environments where ordinary general-purpose gloves may not provide sufficient protection against mechanical cut hazards.

A current Bangladesh supplier specification for the same product name describes the gloves as being made from a combination of HPPE (High-Performance Polyethylene), nylon and spandex. This combination is intended to provide cut protection while maintaining flexibility, breathability and hand movement.

Cut-resistant gloves are commonly used when handling materials such as:

• Sheet metal
• Glass
• Sharp-edged components
• Mechanical parts
• Metal profiles
• Construction materials
• Warehouse materials
• Industrial tools
• Fabrication components

The knitted construction allows the glove to fit around the hand while still providing useful finger movement for handling and positioning materials.

The gloves are reusable and can be suitable for extended workplace use when they remain clean, undamaged and appropriate for the hazard being handled.

Cut-resistant gloves, however, should never be described as completely cut-proof. Their purpose is to reduce cut risk when the correct glove is selected for the specific hazard. Even certified gloves have defined performance levels rather than unlimited resistance. Ansell similarly emphasizes matching the glove’s cut rating to the workplace hazard.

The exact performance rating of the Inaya Scientific supplied glove should be confirmed from its markings or technical documentation before use in environments where a specific certified protection level is mandatory.

Key Features

• Level-5 supplier-listed cut-resistant hand gloves.
• Designed for protection against sharp-edged materials.
• Suitable for industrial and workplace safety applications.
• Commonly supplied in HPPE-based knitted construction.
• Nylon and spandex may be incorporated for flexibility and fit.
• Lightweight knitted design.
• Flexible finger movement.
• Breathable structure for improved wearing comfort.
• Suitable for prolonged handling tasks.
• Helps protect against cuts and abrasions.
• Suitable for handling metal edges.
• Suitable for handling glass and similar sharp materials.
• Useful in workshops and engineering facilities.
• Suitable for material-handling operations.
• Stretchable construction.
• Reusable design.
• Washable subject to applicable care instructions.
• Manual protective equipment requiring no power.
• Easy to store with other personal protective equipment.
• Useful for industrial PPE procurement.

A Bangladesh listing for this product identifies applications including glass handling, metal fabrication, automotive work, construction, warehousing and laboratory equipment handling.

Product Overview

Level-5 Cut Resistance

The product is commercially identified as Cut Resistant Hand Gloves Level-5.

Level-5 indicates a high cut-resistance designation in product listings, but users should check which test method was used.

This distinction is important because different standards use different rating systems.

For example, EN 388 can include the original Coupe blade-cut result on a 0–5 scale, while the newer ISO 13997 cut result is expressed using A–F ratings.

Therefore, institutional buyers who require certified PPE should check the actual glove marking rather than relying only on the words “Level-5.”

HPPE-Based Construction

A current Bangladesh product listing identifies the material combination as:

• HPPE
• Nylon
• Spandex

HPPE is widely used in cut-resistant glove constructions because high-performance fibres can provide mechanical protection without requiring excessively heavy gloves.

The exact fibre percentage is not provided in the available product information and should not be assumed.

Flexible Knitted Design

The glove’s knitted construction is intended to follow the shape of the hand.

This can provide improved freedom of movement compared with rigid hand protection and makes the gloves useful for tasks where workers need to:

• Pick up components
• Position materials
• Hold tools
• Move boxes
• Handle machinery parts
• Sort materials
• Perform repetitive handling work

Breathable Construction

The textile structure allows more airflow than fully impermeable glove designs.

This can improve wearing comfort during extended dry handling tasks.

Breathability does not mean the glove is suitable for chemical handling or liquid protection.

Stretchable Fit

Nylon and spandex components can provide flexibility and help the glove conform to different hand shapes.

A current Bangladesh listing describes the product as having a standard stretchable fit.

Exact available sizes should still be confirmed before ordering.

Reusable Design

Unlike disposable examination gloves, cut-resistant work gloves are generally intended for repeated use while they remain in acceptable condition.

The gloves should be inspected before each use.

They should be replaced if:

• The fabric is cut.
• Fibres are significantly worn.
• Holes appear.
• Seams become damaged.
• Grip performance deteriorates.
• The glove becomes heavily contaminated.
• Protective performance is uncertain.

Main Applications

Glass Handling

Cut-resistant gloves can help reduce injury risk when workers handle glass sheets, glass components or other materials with potentially sharp edges.

The selected glove must still be appropriate for the specific glass-handling hazard.

Metal Fabrication

Metalworking can expose workers to:

• Sheet-metal edges
• Cut metal components
• Fabricated parts
• Metal profiles
• Burrs
• Sharp workpieces

Cut-resistant gloves may provide useful hand protection during suitable handling operations.

Engineering Workshops

Engineering workshops frequently involve mechanical components and sharp-edged materials.

These gloves can be included as part of PPE for applicable handling tasks.

Automotive Work

Automotive workshops may involve sheet metal, mechanical parts and components with edges that can cause cuts.

Suitable cut-resistant gloves can help provide an additional protective barrier during appropriate tasks.

Construction Work

Construction workers may encounter:

• Metal sections
• Glass
• Sheet materials
• Wire
• Building components
• Sharp-edged equipment

Cut-resistant gloves may therefore be useful when matched correctly to the task.

Warehouse and Material Handling

Warehouses often involve repeated handling of:

• Cartons
• Metal packaging
• Industrial components
• Equipment
• Building materials
• Replacement parts

Cut protection may be useful where sharp edges are present.

Laboratory Safety

Some laboratory environments involve handling equipment, metal parts, glass or materials capable of producing mechanical cuts.

Cut-resistant gloves can be useful when the laboratory risk assessment identifies a mechanical cut hazard.

They should not automatically replace appropriate chemical-resistant, heat-resistant or disposable laboratory gloves.

Manufacturing Facilities

Manufacturing operations may require workers to handle sharp or rough materials repeatedly.

Cut-resistant gloves may help improve hand protection during:

• Assembly
• Component handling
• Sorting
• Packaging
• Maintenance
• Material preparation

Recycling and Waste Sorting

Workers handling metal pieces, cans, glass or other sharp materials may require suitable mechanical protective gloves.

The actual glove rating should be selected according to the severity of the hazard.

Key Benefits

• Cut protection: Helps reduce exposure to mechanical cut hazards.
• Flexible fit: Designed to maintain useful hand movement.
• Lightweight construction: Suitable for repeated handling tasks.
• Breathability: Textile construction can improve comfort.
• Reusable: Suitable for repeated use while undamaged.
• Industrial application: Appropriate for multiple workplace sectors.
• Metal handling: Useful around sharp-edged components.
• Glass handling: Can support safer handling where the rating is suitable.
• Workshop use: Suitable for applicable mechanical tasks.
• Construction use: Useful for handling selected building materials.
• Laboratory use: Can provide mechanical hand protection where appropriate.
• Material handling: Suitable for warehouses and manufacturing facilities.
• No power required: Completely passive PPE.
• Easy storage: Can be stored with standard workplace safety equipment.
• Cost-effective PPE: Reusable design can support regular workplace use.

Who Should Buy This Product?

The Cut Resistant Hand Gloves Level-5 are suitable for:

• Industrial factories
• Manufacturing plants
• Engineering workshops
• Mechanical workshops
• Automotive workshops
• Metal fabrication companies
• Glass-processing businesses
• Construction companies
• Warehouses
• Maintenance teams
• Laboratory facilities
• Educational technical laboratories
• Production facilities
• Packaging departments
• Material-handling teams
• Machine operators
• Maintenance technicians
• Engineering students
• Laboratory technicians
• Safety departments
• PPE procurement departments
• Institutional buyers

Usage and Handling Summary

Choose the correct glove size before use.

Inspect both gloves carefully for:

• Cuts
• Holes
• Tears
• Excessive wear
• Damaged fibres
• Contamination

Do not use damaged gloves.

Place each glove fully over the hand and ensure the fingers are positioned correctly.

Check that the glove does not restrict normal hand movement excessively.

Use the gloves only for tasks appropriate to their verified protection rating.

Avoid deliberately testing the gloves against a sharp blade.

Keep hands away from moving blades, rotating equipment and other machinery hazards even while wearing gloves.

Do not assume that cut resistance also provides:

• Puncture resistance
• Needle protection
• Chemical resistance
• Electrical insulation
• Heat resistance
• Flame resistance

Remove gloves carefully after use.

Clean them according to the manufacturer or supplier’s instructions.

Allow cleaned gloves to dry completely before storage.

Store them in a clean, dry place away from:

• Excessive heat
• Open flame
• Direct sunlight
• Oils or chemicals that may damage the fibres
• Sharp objects that could damage the gloves during storage

Inspect the gloves again before reuse.

Safety Considerations

• Cut-resistant does not mean cut-proof.
• Never intentionally expose the glove to a blade to test its performance.
• Use the correct protection level for the identified hazard.
• Do not use damaged gloves.
• Replace heavily worn gloves.
• Keep hands away from operating cutting machinery.
• Confirm machine-safety procedures before wearing gloves near rotating equipment.
• Loose gloves can create entanglement hazards around some machinery.
• Do not assume chemical resistance.
• Do not assume heat resistance.
• Do not assume puncture resistance.
• Do not assume electrical insulation.
• Confirm certification where workplace regulations require certified PPE.
• Use additional PPE where required.
• Follow the workplace risk assessment and safety procedure.

Cut-resistant gloves are intended to reduce injury risk when correctly selected, rather than make the user’s hands immune to cutting hazards.

Limitations and Important Considerations

• “Level-5” does not by itself identify the complete certification standard.
• EN 388 Coupe Level 5 and ANSI A5 are not interchangeable ratings.
• ISO 13997 uses an A–F cut-resistance scale.
• Exact EN 388 performance code has not been confirmed.
• Exact ANSI rating has not been confirmed.
• Manufacturer has not been confirmed.
• Model number has not been confirmed.
• Country of origin has not been confirmed.
• Exact material percentages have not been confirmed.
• Exact glove size should be checked from available stock.
• Color may vary between batches.
• Cut resistance does not automatically mean puncture resistance.
• Cut resistance does not automatically mean needle resistance.
• Chemical resistance has not been established.
• Heat resistance has not been established.
• Electrical resistance has not been established.
• Flame resistance has not been established.
• Damaged gloves provide reduced protection.
• Users should select PPE according to the actual workplace hazard.

Available Pack Size or Variations

The requested configuration is:

Product: Cut Resistant Hand Gloves
Protection Designation: Level-5
Category: Safety Products
Product Type: Industrial Cut-Resistant Gloves
Common Material: HPPE + Nylon + Spandex
Common Color: Grey
Fit: Stretchable
Reusable: Yes
Pack Size: 1 Pair
Operation: Manual

Exact size, coating, color and certification markings should be confirmed from the currently supplied batch.

Cut Resistant Hand Gloves Level-5 Price in Bangladesh

The latest Cut Resistant Hand Gloves Level-5 price in Bangladesh is available from Inaya Scientific on request.

For general market reference, current Bangladesh scientific and safety-equipment suppliers list products under this exact name at approximately ৳440–৳450 per pair, although seller pricing and specifications may change.

Inaya Scientific’s actual selling price may vary according to:

• Current stock
• Supplier pricing
• Glove specification
• Certification
• Material
• Size
• Product batch
• Order quantity
• Institutional quotation requirements
• Delivery location

Customers should contact Inaya Scientific for the latest quotation.

Availability and Delivery in Bangladesh

The Cut Resistant Hand Gloves Level-5 can be supplied by Inaya Scientific subject to current stock and specification confirmation.

Nationwide delivery support is available across Bangladesh subject to applicable courier and delivery conditions.

Customers requesting a quotation should provide:

• Required quantity
• Required glove size, if applicable
• Organization or institution name
• Required cut-resistance standard, if mandatory
• Delivery location

Institutional buyers should ideally request confirmation of:

• Product brand
• Model
• Glove size
• Material
• Level-5 designation
• EN 388 marking, if required
• ISO cut rating, if required
• ANSI cut rating, if required
• Pack quantity
• Country of origin
• Current stock
• Current price

Why Buy From Inaya Scientific?

• Current Bangladesh price confirmation.
• Safety-product sourcing support.
• Industrial PPE supply assistance.
• Laboratory safety-product sourcing.
• Cut-resistant glove specification confirmation.
• Institutional quotation assistance.
• Bulk-order support.
• School, university and laboratory procurement support.
• Factory and industrial safety-equipment sourcing.
• Product configuration verification before ordering.
• Related PPE sourcing support.
• Nationwide delivery support subject to stock and delivery conditions.

Frequently Asked Questions

1. What are Cut Resistant Hand Gloves Level-5?

Cut Resistant Hand Gloves Level-5 are protective work gloves designed to help reduce the risk of cuts when handling sharp-edged materials during suitable industrial, workshop, laboratory and material-handling tasks.

2. What does Level-5 mean on cut-resistant gloves?

Level-5 is a cut-resistance designation, but the applicable test standard must be checked. Under EN 388, the Coupe blade-cut test can use a 0–5 scale, while the ISO 13997 cut test uses ratings from A to F.

3. Is Level-5 the same as ANSI A5?

No. The terms should not be treated as interchangeable. ANSI and EN standards use different testing and rating systems. The glove’s actual certification marking should be checked before claiming ANSI A5.

4. What material are these gloves made from?

A current Bangladesh listing for this product specifies HPPE, nylon and spandex. The exact material of the Inaya Scientific supplied batch should be confirmed before institutional procurement.

5. Are Cut Resistant Level-5 Gloves cut-proof?

No. Cut-resistant gloves are designed to reduce cut risk; they are not completely cut-proof. Protection depends on the glove’s tested rating, condition and the hazard involved.

6. Can these gloves be used for handling glass?

They can be suitable for certain glass-handling operations when the glove’s verified protection level matches the hazard. Current supplier information lists glass handling as one of the applications for this product.

7. Are they suitable for metal fabrication?

Yes. Cut-resistant gloves are commonly used for handling sheet metal and other sharp-edged components, subject to appropriate hazard assessment and glove selection.

8. Can these gloves be used in laboratories?

Yes, where the primary hazard is mechanical cutting or abrasion. They should not automatically replace chemical-resistant, disposable, heat-resistant or other specialized laboratory gloves.

9. Are the gloves reusable?

The commonly listed product is reusable. Gloves should nevertheless be inspected before every use and replaced if damaged, heavily worn or contaminated.

10. Are Cut Resistant Level-5 Gloves washable?

The supplier-listed product is described as washable and reusable. Cleaning should follow the actual manufacturer’s care instructions because incorrect washing may affect protective performance.

11. Do these gloves protect against punctures or needles?

Not necessarily. A cut-resistance rating should not be interpreted as proof of puncture or needle resistance unless separate test results confirm those properties.

12. Do these gloves protect against chemicals?

Chemical resistance has not been confirmed for this generic Level-5 glove. Use properly tested chemical-resistant gloves when handling hazardous chemicals.

13. What industries can use Cut Resistant Hand Gloves?

They may be suitable for metal fabrication, engineering, automotive work, construction, warehousing, manufacturing, glass handling and selected laboratory tasks.

14. What is the Cut Resistant Hand Gloves Level-5 price in Bangladesh?

The latest Inaya Scientific price is available on request. Current Bangladesh market listings for similarly named Level-5 cut-resistant gloves are around ৳440–৳450 per pair, but actual prices can change.

Order From Inaya Scientific

Order Cut Resistant Hand Gloves Level-5 from Inaya Scientific for laboratory, industrial, workshop, engineering, construction and material-handling safety applications.

Seller: Inaya Scientific
Product: Cut Resistant Hand Gloves Level-5
Pack Size: 1 Pair
Mobile: +880 1778-492798
WhatsApp: 01620247815
Email: inayascientific@gmail.com
Website: www.inayascientific.com
Delivery: Nationwide delivery across Bangladesh, subject to stock and delivery confirmation.

When ordering, specify: