Product Description

The 25cm Dressing Forceps Stainless Steel Tweezer is a long manual gripping instrument designed for controlled handling of dressings, cotton, gauze, bandages and other suitable materials in medical, laboratory and educational environments.

The instrument measures approximately 25 cm or 250 mm in length, equivalent to approximately 10 inches. Current exact-product listings in Bangladesh confirm this size and identify the product as being manufactured from stainless steel.

Its extended length provides additional reach compared with shorter tweezers or forceps. This can be useful when users need to handle materials while maintaining additional distance between the hand and the working area.

The currently listed design incorporates straight, blunt gripping tips. These tips are intended to hold dressing materials and similar items without using a sharp pointed end.

The forceps also feature a serrated non-slip gripping area, helping users maintain better control while opening, closing and positioning the instrument. Current product descriptions specifically identify the serrated handle as a feature intended to provide stable control during use.

Typical materials that may be handled using dressing forceps include:

• Cotton
• Gauze
• Bandages
• Dressing materials
• Swabs
• Suitable laboratory materials
• Small non-delicate items
• Training materials

The stainless-steel construction provides a rigid, reusable instrument body suitable for routine professional handling.

Current Bangladesh listings describe the product for use in hospitals, clinics, laboratories, ophthalmic environments and teaching institutions.

Because the forceps operate mechanically through manual pressure, they require:

• No electricity
• No battery
• No software
• No calibration
• No electronic maintenance

This makes the product a simple and practical addition to medical accessory, laboratory and educational instrument inventories.

Key Features

• 25 cm long dressing forceps.
• 250 mm nominal length.
• Approximately 10-inch size.
• Stainless-steel construction.
• Straight gripping design.
• Blunt tips.
• Serrated handle area.
• Non-slip gripping design.
• Long reach for controlled handling.
• Reusable instrument.
• Easy manual operation.
• No battery required.
• No electrical connection required.
• No calibration required.
• Suitable for handling cotton.
• Suitable for handling gauze.
• Suitable for dressing materials.
• Useful for bandage-handling applications.
• Suitable for laboratories.
• Suitable for medical training.
• Suitable for hospitals and clinics.
• Smooth stainless-steel finish.
• Compact and easy to store with other instruments.
• Made in China according to current exact-product listings.

The 25 cm size, stainless-steel construction, blunt tips and serrated grip are confirmed by current Bangladesh product information.

Product Overview

25 cm / 250 mm Length

The principal dimensional specification of this dressing forceps is:

25 cm = 250 mm = approximately 10 inches

Both current exact-match Bangladesh listings identify the instrument as 250 mm or approximately 10 inches long.

The longer design provides additional reach compared with shorter handheld forceps.

This can be useful where the operator needs to grip an item without positioning the hand immediately beside the working area.

Stainless Steel Construction

The instrument is manufactured from stainless steel according to the available product listings.

Stainless-steel construction provides:

• Rigid instrument structure
• Smooth working surfaces
• Reusable design
• Resistance to ordinary handling wear
• Convenient cleaning compared with porous materials

The exact stainless-steel grade has not been identified in the available product information and should therefore not be claimed as 304, 316 or surgical-grade stainless steel unless verified from manufacturer documentation.

Straight Blunt Tips

The current exact-product specification identifies the instrument as having straight, blunt tips.

The blunt design makes the forceps suitable for holding items such as:

• Cotton
• Gauze
• Dressing material
• Bandage material
• Swabs
• Other appropriate items

It should not be described as a sharp dissecting forceps unless the supplied instrument actually has sharp tips.

Serrated Non-Slip Handle

The gripping portion incorporates a serrated surface intended to improve control.

Current listings specifically describe this as a serrated, anti-slip or non-slip handle.

The textured gripping surface can help users maintain control when:

• Wearing gloves
• Handling the instrument repeatedly
• Working with small materials
• Positioning dressing items

Manual Tweezer-Style Operation

The forceps operate by manually applying pressure to the two arms.

When pressure is applied, the tips move together to grip an item.

When pressure is released, the arms return toward their original position.

This simple mechanism requires no powered components.

Reusable Instrument

The stainless-steel design allows the instrument to be reused when it remains undamaged and is cleaned or reprocessed according to the applicable facility procedure.

Users should inspect reusable forceps for:

• Bent arms
• Misaligned tips
• Corrosion
• Surface damage
• Loose or irregular gripping surfaces

before reuse.

Main Applications

Dressing Procedures

The primary application is handling materials used during suitable dressing procedures.

Current product descriptions specifically identify dressing and wound-care handling among the intended uses.

The forceps may be used to manipulate suitable dressing materials rather than handling them directly by hand.

Cotton Handling

The blunt gripping tips can be used to pick up and position cotton during appropriate medical, laboratory or training activities.

Gauze Handling

Gauze can be held using the forceps where controlled manual handling is required.

The long 25 cm design allows the user’s hand to remain further from the working end than with a short tweezer.

Bandage and Dressing Material Handling

Suitable pieces of dressing or bandage material can be picked up and repositioned using the forceps.

Laboratory Work

Current product information includes laboratory applications.

Possible routine uses may include:

• Handling suitable laboratory materials
• Picking up small objects
• Positioning non-hazardous samples
• Educational demonstrations
• Instrument training

The forceps should not automatically be considered suitable for corrosive chemicals or specialized biological containment work without confirming material compatibility and laboratory procedures.

Clinical Training

Medical, nursing and health-science training institutions can use dressing forceps for appropriate practical demonstrations.

Students can learn:

• Instrument identification
• Proper gripping technique
• Dressing-material handling
• Instrument transfer
• Basic instrument care

Hospital and Clinic Use

Current listings identify hospitals and clinics as intended environments for the product.

Any clinical use should follow the healthcare facility’s applicable infection-control, cleaning and instrument-processing requirements.

Ophthalmic and Delicate Handling

The exact Bangladesh listing also mentions ophthalmic and delicate medical handling as potential applications.

However, buyers requiring a dedicated ophthalmic instrument should verify tip geometry, finish, size and device specification before procurement rather than relying only on the generic dressing-forceps description.

Educational Laboratory Demonstrations

Schools, colleges, universities and training institutes may include dressing forceps in medical, biological or health-science practical instrument collections.

Key Benefits

• Extended reach: 25 cm length provides additional working distance.
• Stainless steel: Durable reusable instrument construction.
• Blunt tips: Suitable for gripping dressing materials.
• Straight design: Simple controlled handling.
• Serrated grip: Helps maintain manual control.
• Reusable: Can be used repeatedly when properly maintained.
• Manual operation: No electrical system required.
• No calibration: Ready for simple manual use.
• Versatile: Suitable for multiple general handling applications.
• Medical application: Useful for appropriate dressing-related work.
• Laboratory application: Suitable for general lab handling where appropriate.
• Training-friendly: Useful for clinical and educational demonstrations.
• Easy storage: Can be stored with standard instrument sets.
• Easy inspection: Simple instrument design makes visible condition checks straightforward.
• Portable: Lightweight manual instrument format.
• Professional length: Longer than standard small tweezers.

Who Should Buy This Product?

The 25cm Dressing Forceps Stainless Steel Tweezer is suitable for:

• Hospitals
• Clinics
• Diagnostic centres
• Medical colleges
• Nursing colleges
• Medical training centres
• Healthcare facilities
• Research laboratories
• Educational laboratories
• Biology laboratories
• Universities
• Medical teaching institutions
• Laboratory technicians
• Nurses
• Healthcare professionals
• Medical students
• Nursing students
• Laboratory assistants
• Clinical training departments
• Institutional procurement teams
• Medical-equipment suppliers
• Laboratory-equipment suppliers

Usage and Handling Summary

Inspect the forceps before use.

Check that:

• Both arms are straight.
• The tips align properly.
• The gripping surfaces are clean.
• There is no visible corrosion.
• There are no sharp accidental burrs.
• The instrument is appropriate for the intended task.

Hold the forceps around the serrated gripping area.

Apply gentle pressure to bring the tips together.

Grip the required cotton, gauze, dressing material or other suitable item.

Avoid applying excessive force that could:

• Damage the material
• Bend the forceps
• Cause the item to slip

Release pressure carefully when placing the material.

After use, follow the applicable facility procedure for cleaning, disinfection or reprocessing.

Allow the instrument to dry appropriately before storage.

Store it in a clean and dry instrument area.

Avoid prolonged storage while the forceps are wet.

Before each subsequent use, inspect tip alignment and surface condition again.

Cleaning and Care Summary

Remove visible material after use according to the applicable facility procedure.

Use cleaning products compatible with stainless-steel instruments.

Avoid unnecessarily abrasive cleaning that could damage the surface finish.

Rinse and dry according to the applicable cleaning protocol.

Inspect:

• Tips
• Serrated gripping area
• Inner surfaces
• Outer surfaces

for remaining contamination or damage.

Where sterilization is required, use only a validated method compatible with the actual supplied instrument and institutional procedure.

The commercial product listings state that the stainless-steel instrument is suitable for routine cleaning and sterilization, but the exact manufacturer’s autoclave cycle or sterilization parameters have not been independently verified.

Safety Considerations

• Use only for an appropriate intended task.
• Inspect before every use.
• Do not use visibly damaged forceps.
• Do not use corroded instruments.
• Do not use forceps with misaligned tips where accurate gripping is required.
• Follow facility infection-control procedures.
• Clean and reprocess reusable instruments appropriately.
• Do not assume the product is supplied sterile.
• Do not claim sterile packaging unless confirmed.
• Confirm suitability before invasive or regulated clinical use.
• Avoid excessive mechanical force.
• Keep clean instruments separated from contaminated instruments.
• Store in a clean, dry location.
• Follow institutional medical-waste and contamination procedures.
• Use suitable PPE where required.

Limitations and Important Considerations

• Exact stainless-steel grade has not been confirmed.
• Do not automatically describe the material as 304 stainless steel.
• Do not automatically describe the material as 316 stainless steel.
• “Surgical-grade stainless steel” has not been verified from a manufacturer datasheet.
• Sterile supply has not been confirmed.
• Instrument is not confirmed as individually sterile packaged.
• Exact tip width has not been specified.
• Exact jaw width has not been specified.
• Exact weight has not been specified.
• Manufacturer has not been confirmed.
• Model number has not been confirmed.
• Medical-device registration has not been verified.
• Specific autoclave temperature and cycle have not been confirmed.
• Corrosion resistance depends on material quality and handling.
• Improper cleaning may damage the instrument.
• Damaged or misaligned forceps should not be used for precision work.
• Institutional buyers should confirm required medical or regulatory documentation before procurement.

Available Pack Size or Variations

The requested configuration is:

Product: Dressing Forceps Stainless Steel Tweezer
Length: 25 cm
Equivalent Length: 250 mm / approximately 10 Inch
Material: Stainless Steel
Tip: Straight, Blunt
Grip: Serrated / Non-Slip
Operation: Manual
Pack Size: 1 Piece
Origin: China

The above key specifications are supported by current exact-product Bangladesh listings.

A 20 cm Dressing Forceps Stainless Steel Tweezer is also currently listed by the same Bangladesh supplier as a separate size option, indicating that buyers can choose different forceps lengths depending on their requirement.

25cm Dressing Forceps Stainless Steel Tweezer Price in Bangladesh

The latest 25cm Dressing Forceps Stainless Steel Tweezer price in Bangladesh should be confirmed from Inaya Scientific before ordering.

For market reference, one current Bangladesh scientific supplier lists this exact 25 cm model at approximately ৳130 per piece.

Another Bangladesh seller currently lists the same 25 cm / 250 mm product at approximately ৳120 per piece.

These third-party prices should not be treated as Inaya Scientific’s actual selling price.

The final Inaya Scientific price may vary according to:

• Current stock
• Supplier cost
• Product batch
• Stainless-steel quality
• Order quantity
• Import cost
• Institutional quotation requirements
• Required documentation
• Delivery location

For an accurate quotation, customers should request:

25cm Dressing Forceps Stainless Steel Tweezer – 250 mm / 10 Inch – 1 Piece

Availability and Delivery in Bangladesh

The 25cm Dressing Forceps Stainless Steel Tweezer can be supplied by Inaya Scientific subject to current stock and product confirmation.

Nationwide delivery across Bangladesh is available subject to applicable stock, courier coverage and delivery conditions.

Customers requesting a quotation should provide:

• Required quantity
• Institution or organization name
• Required length: 25 cm
• Intended application
• Required certification or documentation, if applicable
• Delivery location

Institutional buyers should ideally confirm:

• 25 cm / 250 mm length
• Stainless-steel material
• Straight blunt tip
• Serrated grip
• Country of origin
• Manufacturer, if required
• Sterility status
• Reprocessing requirements
• Current stock
• Current price

Why Buy From Inaya Scientific?

• Current Bangladesh price confirmation.
• Medical accessory sourcing support.
• Laboratory instrument sourcing.
• Stainless-steel forceps supply assistance.
• Institutional quotation support.
• Hospital and clinic procurement assistance.
• Educational laboratory supply.
• Medical college and nursing college supply support.
• Bulk-order assistance.
• Product-size confirmation before ordering.
• Instrument specification verification support.
• Related laboratory and medical accessory sourcing.
• Nationwide delivery support subject to stock and delivery conditions.

Frequently Asked Questions

1. What is a 25cm Dressing Forceps Stainless Steel Tweezer?

It is a long stainless-steel manual forceps designed for gripping and handling suitable materials such as cotton, gauze, dressings and bandages in medical, laboratory and educational environments. Current Bangladesh listings describe the product as a professional dressing forceps / medical tweezer.

2. What is the length of the dressing forceps?

The forceps is 25 cm or 250 mm long, which is approximately 10 inches.

3. What material is the forceps made from?

Current exact-product listings specify stainless steel. The exact stainless-steel grade has not been identified.

4. Does the forceps have sharp or blunt tips?

The current exact-product specification identifies straight, blunt tips.

5. Does the handle have a non-slip grip?

Yes. Current product descriptions specify a serrated, non-slip grip designed to improve manual control.

6. What can dressing forceps be used to hold?

Typical listed applications include handling cotton, gauze, bandages, dressing materials and other suitable medical or laboratory items.

7. Can this forceps be used in a laboratory?

Yes. Current supplier information specifically includes laboratory applications for this 25 cm forceps.

8. Is it suitable for hospitals and clinics?

Current listings identify hospitals and clinics among the intended professional environments. Actual clinical use should follow the facility’s procurement, infection-control and instrument-processing requirements.

9. Is the dressing forceps reusable?

The stainless-steel construction is intended for reusable handling. The instrument should be appropriately cleaned, inspected and reprocessed according to the intended application and institutional procedure.

10. Can the forceps be sterilized?

The current supplier descriptions state that the stainless-steel instrument is suitable for cleaning and repeated sterilization. However, an original manufacturer sterilization datasheet was not identified, so exact autoclave temperature, exposure time and validated cycle should be confirmed for regulated clinical use.

11. Is the forceps supplied sterile?

Sterile packaging has not been confirmed in the available product information. It should therefore not be described as sterile unless the actual supplied packaging states this.

12. Where is the 25cm Dressing Forceps made?

Both current exact-product listings identify the product as Made in China.

13. Is a shorter size available?

A 20 cm stainless-steel dressing forceps is currently listed separately by the same Bangladesh scientific supplier. Availability from Inaya Scientific should be confirmed before ordering.

14. What is the 25cm Dressing Forceps price in Bangladesh?

Current third-party Bangladesh listings show the exact product at approximately ৳120–৳130 per piece. Inaya Scientific’s actual selling price should be confirmed directly because prices and stock can change.

Order From Inaya Scientific

Order the 25cm Dressing Forceps Stainless Steel Tweezer from Inaya Scientific for medical, laboratory, educational and general professional handling applications.

Seller: Inaya Scientific
Product: 25cm Dressing Forceps Stainless Steel Tweezer
Length: 25 cm / 250 mm / approximately 10 Inch
Material: Stainless Steel
Tip Type: Straight, Blunt
Pack Size: 1 Piece
Origin: China, based on current exact-product listings
Mobile: +880 1778-492798
WhatsApp: 01620247815
Email: inayascientific@gmail.com
Website: www.inayascientific.com
Delivery: Nationwide delivery across Bangladesh, subject to stock and delivery confirmation.

When ordering, specify:

25cm Dressing Forceps Stainless Steel Tweezer – 250 mm / 10 Inch – Straight Blunt Tip – 1 Piece

For institutional, laboratory or clinical procurement, contact Inaya Scientific to confirm the current manufacturer, stainless-steel specification, sterility status, reprocessing compatibility, country of origin, quantity, stock, price and delivery conditions before finalizing the order.