-6%

Multifiber DW SDC 10 Meter Roll for Colour-Fastness Testing

Original price was: 3,200.00৳ .Current price is: 3,000.00৳ .

Brand: SDC Enterprises / SDCE

Official Product Name: SDCE Multifibre DW

Product Code: 2115

Product Type: Six-Fibre Adjacent Testing Fabric

Roll Length: 10 Metres

Fibre Components: Acetate, Cotton, Nylon, Polyester, Acrylic and Wool

Primary Application: Textile Colour-Fastness Testing

Relevant Standards: ISO 105-F10 and applicable ISO 105 C and E series methods

Country of Origin: United Kingdom

Description

Product Description

Multifiber DW SDC 10 Meter Roll, officially named SDCE Multifibre DW, is a standardized adjacent fabric used to assess colour transfer during textile colour-fastness testing. The 10-metre roll carries product code 2115 and is manufactured in the United Kingdom by SDC Enterprises.

The fabric contains six parallel fibre components: acetate, cotton, nylon, polyester, acrylic and wool. During a specified test, the multifibre strip is placed in contact with the textile specimen. Any transferred colour can then be assessed separately on each fibre component, helping the laboratory evaluate staining behaviour across several common textile materials in one test assembly.

SDCE Multifibre DW is produced in a narrow ribbon construction for economical cutting, convenient handling and stability during use. It is associated with ISO 105-F10 and may be used in many applicable ISO 105 C-series and E-series colour-fastness methods. The exact standard, specimen size and procedure must always be confirmed before testing.

Key Features

Brand and manufacturer: SDC Enterprises Limited / SDCE
Official product name: SDCE Multifibre DW
Product code for the 10-metre roll: 2115
Six fibre components in one adjacent testing fabric
Contains acetate, cotton, nylon, polyester, acrylic and wool
Narrow ribbon-style woven construction
Suitable for specified textile colour-fastness procedures
Associated with ISO 105-F10 and applicable ISO 105 C and E series methods
Identification weave supports quick product recognition
SDCE security thread supports authentication of genuine material
Quality-control testing is conducted on component yarns and finished fabric before batch release
Continuous 10-metre roll can be cut according to the selected test method
Country of origin: United Kingdom

Product Overview

Adjacent fabrics are used to reveal staining when colour migrates from a dyed, printed or finished textile specimen during a controlled laboratory test. A multifibre adjacent fabric provides several receiving fibre types side by side, making it possible to compare staining on different fibres without preparing six separate pieces.

Multifibre DW is the traditional six-component SDCE construction. It should not be confused with Multifibre LyoW or Multifibre SLW, which contain different fibre arrangements for other testing requirements. Laboratories should select the exact construction stated in the buyer protocol, retailer method, laboratory SOP or published standard.

Specification Details

Specification	Details
Product name	Multifiber DW SDC 10 Meter Roll
Official SDCE name	SDCE Multifibre DW
Brand / manufacturer	SDC Enterprises Limited / SDCE
Product code	2115
Product category	Adjacent fabric for textile testing
Roll length	10 metres
Fabric construction	Narrow ribbon-style multifibre weave
Number of fibre components	Six
Fibre components	Acetate, cotton, nylon, polyester, acrylic and wool
Relevant standard fabric reference	ISO 105-F10
Common method families	Applicable ISO 105 C series and E series colour-fastness tests
Identification features	Identification weave and SDCE security thread
Certificate support	Batch-specific documentation may be available; confirm before ordering
Country of origin	United Kingdom

Main Applications

Colour fastness to washing tests that specify Multifibre DW
Colour fastness to water and other wet-contact procedures where the selected method requires this adjacent fabric
Assessment of staining from dyed, printed and finished textile specimens
Textile mill and garment-factory quality-control laboratories
Dyeing, printing and finishing process evaluation
Buying-house, brand and retailer compliance testing
Independent textile testing and inspection laboratories
Textile research, product development and educational laboratories
Inter-laboratory comparison work using a controlled adjacent fabric

Key Benefits

Six Fibres in One Test Fabric

The six-component construction allows staining on acetate, cotton, nylon, polyester, acrylic and wool to be evaluated from one adjacent strip. This can reduce preparation work compared with using separate single-fibre fabrics.

Controlled Laboratory Material

SDCE Multifibre DW is made for colour-fastness testing rather than ordinary textile use. Controlled construction and batch-release procedures support more consistent laboratory practice.

Economical Roll Format

The 10-metre roll lets laboratories cut the length required by the applicable method. It is useful for routine testing where different specimen dimensions may be required.

Easy Handling and Recognition

The narrow ribbon construction is convenient to position beside a textile specimen. An identification weave helps users recognize the material during handling.

Product Authentication Features

The SDCE security thread is incorporated to help distinguish genuine Multifibre DW from inferior copies. Packaging and security details may change between current and transitional batches.

Suitable for Professional Textile Laboratories

The product is designed for controlled colour-fastness work in mills, factories, buying houses, inspection companies, research facilities and accredited laboratories.

Who Should Buy This Product?

Textile and garment manufacturing laboratories
Dyeing, printing and finishing mills
Buying houses and sourcing offices
Third-party textile testing laboratories
Quality-control and quality-assurance departments
Retailer, brand and export-compliance teams
Universities, textile institutes and research laboratories
Government, institutional and industrial procurement departments

Usage and Handling Summary

Use SDCE Multifibre DW only according to the current test standard, buyer method or validated laboratory procedure. A general workflow is outlined below; it does not replace the official method.

Confirm that the selected method specifically requires Multifibre DW or an adjacent fabric complying with the relevant construction.
Condition the textile specimen and adjacent fabric according to the laboratory procedure.
Cut a clean strip to the exact dimensions required by the method using suitable clean scissors or a laboratory cutter.
Identify the orientation of the fibre stripes if the test record requires fibre-by-fibre assessment.
Place, sew or secure the adjacent fabric against the test specimen exactly as instructed by the selected procedure.
Prepare the test solution, equipment, containers, temperature, liquor ratio, time and mechanical action according to the method.
Complete the specified washing, water, perspiration or other treatment without changing the prescribed conditions.
Separate or dry the specimen assembly only when and how the method instructs.
Assess staining on each fibre component with the required grey scale, instrument or rating procedure.
Record the test method, product code, batch information and individual fibre ratings when traceability is required.

Handling and Storage

Store the roll in its original packaging in a clean, dry area.
Protect it from dust, dyes, oils, moisture, chemicals and handling contamination.
Use clean, dry hands or suitable laboratory gloves when touching the test area.
Keep unused material covered and close the package after cutting.
Do not use visibly stained, damaged, wet or contaminated material.
Use a fresh piece for every assessment unless the selected method explicitly states otherwise.
Protect the roll from direct sunlight, excessive heat and high humidity.
Follow the storage statement and batch information on the supplied packaging.
For confirmed shelf-life or batch-specific storage requirements, contact Inaya Scientific for confirmation.

Limitations and Important Considerations

This product is an adjacent testing fabric; it is not a complete testing instrument or a substitute for a validated test method.
Multifibre DW, Multifibre LyoW and Multifibre SLW contain different fibre arrangements and must not be substituted automatically.
The required adjacent fabric depends on the exact standard, buyer specification, retailer protocol or laboratory SOP.
Specimen size, sewing method, detergent or reagent, liquor ratio, temperature, duration and mechanical action vary between test methods.
Staining results depend on specimen preparation, test equipment, water quality, reagent quality, conditioning and assessment conditions.
Visual ratings should be made under the lighting and viewing conditions required by the selected method.
Do not identify fibre stripes by assumption when the laboratory requires confirmed orientation or traceability.
Packaging appearance and security details may differ during SDCE branding or packaging transitions, while the product code remains important for identification.
Any required Certificate of Conformity, batch document, tender specification or buyer approval should be confirmed before ordering.

Available Pack Sizes or Variations

This product page covers SDCE product code 2115, supplied as a 10-metre roll. The manufacturer also lists the following Multifibre DW formats:

Product code 2120: 50-metre roll
Product code 2133: 10cm x 4cm gimped pieces, 250-piece pack
Product code 2143: 10cm x 5cm gimped pieces, 200-piece pack

Availability of each format in Bangladesh depends on current imported stock. Contact Inaya Scientific for confirmation of the required product code, packaging and quantity.

Multifiber DW SDC 10 Meter Roll Price in Bangladesh

The current Multifiber DW SDC 10 Meter Roll price in Bangladesh may vary according to imported stock, product batch, exchange rate, order quantity, documentation requirements and delivery location. The current Inaya Scientific selling price has not been provided.

Contact Inaya Scientific for confirmation of the latest price, current stock, product code 2115 and quotation for bulk, factory or institutional orders.

Availability and Delivery in Bangladesh

Multifiber DW SDC 10 Meter Roll can be ordered from Inaya Scientific, subject to current stock and product-code confirmation.

Nationwide delivery is available in Bangladesh. Delivery time and charges depend on the destination, courier service, order quantity and any special documentation requested by the buyer.

Why Buy From Inaya Scientific?

Current price and stock confirmation before ordering
Nationwide delivery in Bangladesh
Support for textile laboratories, factories and institutional buyers
Bulk-order and procurement quotations on request
Product-code and pack-size confirmation before dispatch
Batch, origin and documentation confirmation when available
Assistance in checking the required Multifibre construction
Communication through mobile, WhatsApp and email

Any required Certificate of Conformity, invoice condition, tender document, batch traceability record or buyer-specific requirement should be confirmed with Inaya Scientific before the order is finalized.

Frequently Asked Questions

What is Multifiber DW SDC used for?

It is used as an adjacent fabric in textile colour-fastness testing. Colour transferred from the test specimen can be assessed separately on its six fibre components.

Which fibres are included in SDCE Multifibre DW?

The fabric contains acetate, cotton, nylon, polyester, acrylic and wool. These fibres are arranged as parallel components within the narrow woven strip.

What is the product code for the 10-metre roll?

The SDCE product code for the 10-metre Multifibre DW roll is 2115. Buyers should mention this code when requesting a quotation or checking stock.

Which standard applies to Multifibre DW?

Multifibre DW is associated with ISO 105-F10 and can be used in many applicable ISO 105 C-series and E-series colour-fastness procedures. The laboratory must confirm the exact standard and current method edition required for the test.

Can Multifibre DW be used for washing-fastness tests?

Yes, it can be used in washing-fastness procedures that specifically require this adjacent-fabric construction. The detergent, temperature, time, liquor ratio and specimen assembly must follow the selected method.

Is this product supplied as pre-cut pieces?

No. This listing is for a continuous 10-metre roll. SDCE also offers separate pre-cut formats under different product codes.

Can one piece of Multifibre DW be reused?

A fresh, uncontaminated piece should normally be used for each assessment. Reusing a stained or processed strip may contaminate the next test and make the result unreliable.

What is the difference between Multifibre DW and Multifibre LyoW?

Multifibre DW contains acetate as one of its six test fibres. Multifibre LyoW uses regenerated cellulose in its own construction, so the two products should not be substituted unless the required method allows it.

How can genuine SDCE Multifibre DW be identified?

The manufacturer uses an identification weave and an SDCE security thread to support recognition and authentication. Packaging may vary between batches, so the product code and current security features should also be checked.

How should the 10-metre roll be stored?

Keep it closed in a clean, dry area protected from dust, moisture, dyes, chemicals and direct sunlight. Contact Inaya Scientific for confirmed batch-specific storage or shelf-life information.

Is a Certificate of Conformity available?

SDCE maintains batch-specific certificate records for its testing products. Request the applicable certificate or batch documentation from Inaya Scientific before ordering when traceability is required.

Where can I buy Multifiber DW SDC 10 Meter Roll in Bangladesh?

You can order product code 2115 from Inaya Scientific, subject to current stock confirmation. Nationwide delivery in Bangladesh and quotations for bulk or institutional requirements are available.

Multifiber DW SDC 10 Meter Roll is suitable for professional textile laboratories that require a controlled six-fibre adjacent fabric for colour-fastness assessment. Its acetate, cotton, nylon, polyester, acrylic and wool components allow staining on several common textile fibres to be examined within one test assembly.

Before ordering or testing, confirm that SDCE Multifibre DW and product code 2115 match the exact standard, buyer protocol and required specimen format. Also request current stock, batch information and any necessary Certificate of Conformity from Inaya Scientific.

Order From Inaya Scientific

Contact Inaya Scientific to order Multifiber DW SDC 10 Meter Roll and confirm the latest price, current stock, product code, batch documentation and delivery charge.